Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3.0 Design Considerations
Installing U-Chill
is easy. All that is required is a hole in your countertop and space below
TM
for the cylinder, a power socket, and depending on the space below your countertop, a
small vent.
3.1 Minimum Space
15-3/4"
1/2"
400
13
(
)
(
)
mm
mm
3.2 Countertop Cutout
6-1/16"
(154
)
mm
Ensure space around the cooling cylinder below
the countertop has a minimum internal height of
15-3/4" (400
) and the hole is at least 1/2"
mm
(13
) away from the internal walls.
mm
If installing multiple U-Chill
units into one void,
TM
ensure that the centre points of each hole are at-
least 7-7/8" (200
apart (1-7/8" distance from
mm)
edge of one U-Chill
crown to the next).
TM
The hole can be created using:
CNC / Waterjet cutting
Specified to 6-1/16" (154
) in diameter
mm
Manual Cutting
Using a standard 6" hole saw
Countertop thickness:
Minimum 1/16" (1.5
)
mm
Maximum 2-1/2" (64
)
mm
3.3 Marine Applications
If installing U-Chill
Install in-cabin and keep dry
The unit is designed to withstand 15 volts for short periods
of time, as is common when many vessels start up
Keep away from chlorinated water, such as hot tubs and
swimming pools
3.4 Natural Stone & Metallic Counters
Materials with magnetic properties (metal counter tops, natural stone with magnetic minerals)
can interfere with the U-Chill
smart-touch crown and the washer provided must be used in
TM
order to insulate the crown.
Simply insert the washer between the U-Chill
1.
Push washer onto U-Chill
TM
PLEASE NOTE:
If you are unsure of whether the counter top has magnetic properties either install the
washer provided or retain for future use
into a yacht or marine environment:
TM
crown and the counter as shown:
TM
2.
Lower into counter, keeping washer
under crown
Publicidad
Capítulos
Tabla de contenido
