Removing The Associations - DELTA DORE TYXIA 253 Manual Del Usuario

Removing the associations

Removing an association group or a
scenario
On the TYXIA 253, press the Select. button until
the display flashes (approx. 5 sec.).
Then press and release the Select. button to select
the group or scenario to remove. Then press one
of the ,
seconds.
For each receiver in the group, press and hold
the association button(s) of the receiver (the LED
flashes after 3 seconds).
Keep pressing until the LED extinguishes to confirm
that all the receiver associations are removed.
Important: This operation also removes the
associations of the receiver with other products.
On the TYXIA 253, select another group to remove
or press the Select. button for 5 seconds to exit
the association mode.
, , or
- 8 -
buttons for 5
EN