Scotts LST01324S Manual Del Operador página 8

Tabla de contenido

Idiomas disponibles

Problem

Possible Couse

-Unit does not Run

-Battery not making contact

-Trigger switch not operational

-Battery not installed properly

-Battery not charged

-Line won't feed

-Line tangled in spool

-Line fails to cut off

-Line cutter in guard is damaged or missing

-Battery will not charge

-Battery not inserted into charger

-Charger not plugged in

-Surrounding air temperature too hot or too cold -Move charger and tool to a surrounding air temperature of about 39

____________________________________________________________________

TROUBLESHOOTING

CALL US FIRST !!

Call us first with questions about operating or maintaining your string trimmer

at 1.800.618.7474 between 8:00 a.m. – 5:00 p.m. Eastern Standard Time,

or get assistance on scotts.americanlawnmower.com.

Possible Solution

-Check battery is fully inserted

-Check that lock off button is fully forward prior to moving trigger

-Check battery installation

-Check battery charging requirements

-Unwrap 24" of line and re-wind

-Replace guard

-Insert battery into charger until red LED appears

-Plug charger into a working outlet

-Check current at receptacle by plugging in a lamp or other appliance

-Check to see if receptacle is connected to a light switch which turns

power off when you turn out the lights

degree F (4 degree C) or below 104 degree F (40 degree C)

NOTES

Tabla de Contenido

Tabla de contenido