System Requirements - Dynex DX-ECDRW100 Manual Del Usuario

One other benefit of USB is plug and play. That is, when you plug the
USB device in, it is automatically detected, drivers installed and then
ready for operation
USB 2.0 supports data transfer at up to 480Mbps for high-speed
devices. It is backward compatible with USB1.1*
peripherals. If your computer doesn't have a built-in USB 2.0 port, you
need to install a USB 2.0 PCI host card in your pc for the CD-RW drive
to run at USB 2.O speed. Otherwise, this CD-RW drive will run at
standard USB speed.
1
* You can connect and disconnect devices while the computer is
running.
2
* USB 1.1 can transfer data at rates up to 12Mb/s.

System Requirements

For IBM compatible PCs, the system requirements recommended are
as follows:
♦ Pentium II 350MHz above with at least 64MB of memory
Sufficient hard disk space (minimum 200MB, 1GB or more is
♦
recommended.)
♦ Operating system: Microsoft Windows 98SE/ME/2000/XP
♦ USB 2.0 PCI host card
2
2
software and