Important Safeguards - Lithonia Lighting JCBL Serie Instrucciones De Instalación

Important Safeguards:

WARNING – When using electrical
equipment, basic safety precautions should
always be used including the following:
This product must be installed in accordance
with the applicable installation code by a
person familiar with the construction and
operation of the product and the hazards
involved.
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
❶
Mount Top Half of the Guard to
the Pendant Mount/Junction Box
• Slide the top half of the full wire guard over the
Pendant Mount/Junction Box.
• Align the holes in the Pendant Mount/Junction
Box with the two of the holes in the guard
mounting plate.
• Drive the screws provided through these holes
into the Pendant Mount/Junction Box.
❷
Assemble the Wire guard
• Attach the bottom half of the wire guard
and close.
SAVE THESE INSTRUCTIONS
One Lithonia Way, Conyers, GA 30012
Phone: 800-315-4963 www.lithonia.com
©2016 Acuity Brands Lighting, Inc. Rev 9/16 P3934-FO-02 pg 1 of 1
Full Wire Guard for JCBL