Operation - Sears Craftsman 247.776360 Manual Del Operador

For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983
Handle
Chute
Deflector
Chipper Chute
Branches up to 2" in diameter may be fed into the chipper chute
for chipping. See Figure 4.
Hopper
Leaves, twigs and branches up to 1/2-inch in diameter may be
placed into the hopper for shredding. See Figure 4.
IMPORTANT: Never place branches with a diameter greater than
1/2-inch in the hopper. Doing so can result in serious damage to your
unit's shredder blade, flails or impeller.
Handle
Use the handle when manually transporting the chipper shred-
der. See Figure 4.

OPERATION

Chipper Chute
www.mymowerparts.com www.mymowerparts.com
Figure 
Reduction Chamber
Debris is shredded and reduced with the reduction chamber. See
Figure 4.
Chute Deflector
Chipped and shredded debris is discharged out the chute deflec-
tor. The unit may be operated with or without the collection bag
attached to the chute deflector. See Figure 4.
WARNING: The operation of any chipper shredder
can result in foreign objects being thrown. Always
wear the safety glasses provided with this unit or
eye shields before chipping or shredding and while
performing any adjustments or repairs.
Engine Controls
See the Briggs & Stratton Owner/Operator manual packed with
your unit for the location and function of the controls on the
engine.

Hopper
Reduction Chamber