Kenmore 148.16156210 Manual De Uso Y Cuidado página 25

Side Burner Tube
Align side burner nozzle with side burner tube. Push nozzle onto tube. Secure nozzle to tube with two
screws as shown. Replace the two side burner screws removed at the beginning of step 16.
Place the side burner drip tray into position as shown.
Side Burner Shelf
Side Burnerdrip tray
5/32-32x 3/16" Screw
Qty.2
Side Burner Nozzle
Side Burner Ignition Wire
The side burner ignition wire has two connectors.
Plug the wider connector into one of the two wider sockets in the igniter.Plug the narrower connector
into the side burner valve as shown.
ii!iiJiiiil
i
Connect here
Connect here
Ignition wire
25