Safety Warnings; The Tv Anywhere System - Marmitek ANALOGUE TV ANYWHERE Modo De Empleo

SAFETY WARNINGS

• This product should only be used indoor and only in dry areas. Do not expose the
components to rain or moisture. Do not use the product close to a bath,
swimming pool etc.
• Do not cover or expose the components of your systems to extremely high
temperatures
• Do not open the product
• In case of improper usage or if you have opened, altered and repaired the product
yourself, all guarantees expire. Marmitek does not accept responsibility in the case
of improper usage of the product or when the product is used for purposes other
than specified.
• Adapters: Only connect the adapter to the mains after checking the mains voltage
is the same as the values on the identification tags. Never connect an adapter or
power cord when it is damaged.
• Batteries: keep batteries out of the reach of children. Dispose of batteries as
chemical waste. Never use old and new batteries or different types of batteries
together. Remove the batteries when you are not using the system for a longer
period of time. Check the polarity (+/-) of the batteries when inserting them in the
product.
1 SET CONTENT
1x TV Anywhere transmitter
1x TV Anywhere receiver
2x Power adapters
1x Infrared extender cable with 1 LED
2x RCA cables (RCA-RCA)
2x SCART adapter
1x Coax cable
1x Instruction manual

1. THE TV ANYWHERE SYSTEM

The TV Anywhere system includes a transmitter with built-in tuner and a receiver for
antenna signals and A/V signals. With the TV Anywhere system, you can transmit
audio and video signals throughout your house to a remote (2nd) TV, without
additional coaxial cables. The built-in tuner converts the antenna signal into a standard
audio/video signal. This A/V signal is transmitted by the unit on a 5,8 GHz frequency.
The TV Anywhere transmitter can be connected directly to your antenna wall socket.
The receiver is connected to the A/V input of your remote (2nd) Television.
ANALOGUE TV ANYWHERE ™ 3