Assembling The Appliance - Ewbank FP160 Guía De Cuidado

Assembling the Appliance

• Ins ert the handle into the aperture at the top
of the body aligning the notch on the tube with
the rear of the unit, and s traighten the s ecurity
collar (F ig.1).
C hanging the pads and plates on your
produc t
• Make s ure machine is not plugged in before
fitting pads .
• Note the orientation of the drive hubs (F ig.2).
• Place the required Hook and loop - plate or brush
plate over the hub and rotate until the shape lines
up ( g.3)
• P res s the plate down to clip into place (F ig.4).
• Always us e two plates of the s ame type, i.e.
not 1 brus h and 1 pad (F ig.5).
• S imply pull the plates off to remove and
change.
A djus t the handle to s uit your height (F ig.6).
F ig.6
F ig.1
F ig.2
F ig.3
F ig.4
F ig.5
5