Features; Assembly - Sears CRAFTSMAN 315.114261 Manual Del Operador

PRODUCT SPECIFICATIONS
Motor ............................................................... 19.2 Volt DC
Blade diameter .......................................................5-1/2 in.
Blade Arbor ............................................................... 3/8 in.
KNOW YOUR TRIM SAW
See Figure 1, page i.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempt-
ing. Before use of this product, familiarize yourself with all
operating features and safety rules.
BEVEL CUT
Angles the trim saw to cut an angle from 0° to 50°.
BLADE WRENCH STORAGE
Convenient wrench storage for quick blade changes.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the tool and accessories from the
box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not
completely assembled or if any parts appear to be
missing or damaged. Use of a product that is not
properly and completely assembled could result in
serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
Cordless Trim Saw
Blade
Blade Wrench
Operator's Manual

FEATURES

Cutting Depth at 0° ...............................................1-9/16 in.
Cutting Depth at 45° ...............................................1-1/8 in.
No Load Speed ...................................... 4500 r/min. (RPM)
DEPTH CUT
Adjusts the depth of cut from 0 in. to 1-9/16 in.
LOCK-OFF BUTTON
The lock-off button reduces the possibility of acciden-
tal starting. The lock-off button is located on the handle
above the switch trigger. You must depress the lock-off
button in order to pull the switch trigger. The lock resets
each time the trigger is released.
NOTE: You can depress the lock-off button from either the
left or right side.
SPINDLE LOCK
Locks the saw blade to tighten or loosen the blade screw.

ASSEMBLY

WARNING:
do not operate this tool until the parts are replaced.
Use of this product with damaged or missing parts
could result in serious personal injury.
WARNING:
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
8 – English
If any parts are damaged or missing
Do not attempt to modify this tool
To prevent accidental starting that