How To Programme And Memorise The Areas; How To Communicate With The Areas; How To Finalise The Connection With The Areas; General Call - Tez audio TMH10 Manual Del Usuario

How to programme and memorise the areas

• Keep the area (1 to 9) key pressed that you wish to programme until the associated
LED starts flashing.
• Then, press keys 1, 5 and 9 in this order.
• The LED will flash various times indicating that the area is memorised.

How to communicate with the areas

• For this operation, the TMH41 should always interact with a TMH40.
• Press the key of the area number (1 to 9) to which we desire to call. The LED associated
to the area will be lit up.
• In the control unit of the ' c alled' area the LED of the area establishing the communica-
tion will light up.
• In the rest of the controls units the LED of the communicating areas will flash indicating
busy line.
• Use the general warnings broadcast controls of the TMH40 control to start conversation
between the areas.
How to fi nalise the connection with the areas
• While the LEDs of the TMH41 of the areas in communication are lit up, conver-
sation may be continued.
• After 10 seconds from the last communication between the TMH40, this will be
interrupted.

General call

• Keep the TMH40 key (GENERAL WARNINGS) pressed without pressing any
other TMH41key.

Busy area indication

• The LEDS of the areas that are in conversation flash in those controls that are not
in communication.
• While the LEDS continue flashing, the line will be busy in those areas.
User Manual
29