KENMORE ELITE 348.71395610 Manual De Uso Y Cuidado página 26

Lines or streaks in pictures
No pictures when
connecting HDMI
Pictures appear in wrong
ratio
The audio function does not work
Picture OK but no sound
No output from one of the
speakers
Unusual sound from inside
the TV
No sound when connecting
HDMI
Audio noise
Password
Lost password
There is a problem in PC mode
The signal is out of range
(invalid format)
Vertical bar or stripe on
background & Horizontal
Noise & Incorrect position
Screen color is unstable or
show a single color
• Check antenna (change the position of the antenna.)
• Check if the input source is HDMI1/HDMI2/HDMI3.
• Adjust the Aspect Ratio settings in the Setup menu or press the
ASPECT button on the remote control.
• Press the VOL +/- buttons.
• Sound muted? Press the MUTE button.
• Try another channel. The problem may be caused by the
broadcaster.
• Adjust the Balance settings in the Audio menu.
• A change in ambient humidity or temperature may result in an
unusual noise when the TV is switched on or off and does not
indicate a fault with the TV.
• Check if the input source is HDMI1/HDMI2/HDMI3.
• Keep the RF coaxial cable away from the other connected
cables.
• Select the SET Password setting in the Lock menu, then enter
the following master password "8899". The master password
clears your previous password and allows you to enter a new
password.
• Adjust the resolution, horizontal frequency, or vertical frequency.
• Use Auto configures or adjust clock, phase, or H/V position.
• Check the signal cable.
• Reinstall the PC video card.
TROUBLESHOOTING
-
En
25