Technical Data - KS Tools 160.0720 Manual De Instrucciones

Introduction
Dear Customer !
You decided to purchase a product from the KS Tools company. Thank you for your trust. In these Instructions, you will
find all information required for safe and proper use. Please therefore read the instructions thoroughly before usage
and adhere to all the guidelines they contain.
These instructions are part of the jack and must therefore be stored in such a way as to ensure they remain undama-
ged. The manufacturer shall not be liable for damage to individuals or property, which is due to prohibited or improper
usage.
1. Provisions for use
The jack described in the current instructions is a mobile lifting device, which is specially intended for the lifting of
motor vehicles.
Since this jack is only intended to function as a lifting device, it must never be used for transporting or loading a ve-
hicle. Shunting under load is also prohibited.

2. Technical data

Air-hydraulic jack
A = Length lever:
A1 = Length lever with extension:
B = Length:
C = Height min:
C = Height stage 1 / max. 25t:
C = Height stage 2 / max. 10t:
Stroke:
Height max.:
D = width:
E = width inc. wheels:
Capacity:
Dead weight:
Ø Piston bearing face:
Piston Ø stage 1:
Piston Ø stage 2:
Max. working pressure:
Air consumption:
3. Delivery items
The jack is delivered with the following parts in a shipping carton:
1 x jack
1 x 2-part shunt lever 2-tlg., base with impact protection pipe and top part with groove
1 x V saddle adapter
1 x Cylinder Adapter
1 x operating manual
Before using, the entire set of delivery items must be checked for completeness and any damage in transit.
4. Assembly
The jack is virtually completely pre-assembled, only the shunt lever needs to be put together.
5. Packaging
The jack is delivered in a carton. The packaging material must be disposed of and recycled in accordance with the
relevant state directive.
578 mm
1180 mm
470 mm
166 mm
238 mm
320 mm
154 mm
450 mm
200 mm
270 mm
25 / 10 t
25,0 kg
58 mm
71 mm
40 mm
12 bar / 170 PSI
500 l / min.
90°
0°
180°