Sorting/Counting - AccuBANKER AB610 Guia Del Usuario

Operation cont.
6.2 Sorting / Counting
The AB610 allows you to count mixed coins of different denominations (different sizes).
This operating mode must be carried out sorting the largest diameter coins first and
separating the smaller diameter coins into a bag. Once done, the user must adjust now the
next largest diameter, then pour rejected coins back into the hopper. Repeat this process
until all coin denominations have been sorted.
1. Ensure the lateral rejection tube and collecting bag are properly in place.
2. Adjust the Diameter and Thickness knobs according to the largest coin present in the
bulk. The sorting procedure must start with the largest coin size and finish with the
smallest coin size.
3. Pour the coins you need to count into the internal hopper. Do not exceed the capacity.
Use the external hopper if necessary.
4. Press the START / STOP key to begin counting.
5. In this first counting set, the largest coin is already sorted. Readjust the Diameter and
Thickness knobs for the next largest coin size.
15