BQS SOGO SS-5135 Manual De Instrucciones página 14

OPERATION OF THE JUICE EXTRACTOR
1. Extracting
(1). Put the cleaned fruit and vegetable into the
feed tube(Please remove the core ,cover,
shell of fruit). If the food type is too large,
please cut into pieces.
(2). Please follow the diagrams to install the
machine completely and put the juice cup
under the juice outlet.
(3). Please see the voltage requirement on the
rating label.
(4) Put the switch on "0" position, then, switch
on power.
(5) Turn on the power, and put the fruit into
the feed tube. Press the pusher downward
slowly to make the fresh delicious
juice. If the fruit is with much water, like
watermelon, please choose speed 1.
(6). Finish the procedure (5), juice flows into
the juice cup and the residue would move
into pulp container.
2. Pay attention:
-For a higher extraction rate, the user
should push the fruit slowly during the
process.
-When the power of the machine is turned
on, please do not put hands or others
things into feed tube.
-Please not let the pulp container
acquire too much residue, which would
effect the quality of juice. Before cleaning,
please switch off the machine.
3. Food handling advice:
(1). Remove the cover of fruit or vegetable
such as Orange, Lemon, pineapple and
pumpkin.
Little fruit seeds (such as grape, orange,
watermelon and lemon ) could be put into
blender with pulp. If the core of fruit is
big(such as peaches, apricots, waxberry,
cherry) before extracting, please remove
the filter base, and wash out the filter to
remove out the cores.
(2). The stems and leaves of fruit or
vegetable can be extracted with fruits and
vegetables.
(3). Before putting the leaves into the feed
tube, please knead leaves into ball
(4). Soft fruits (such as fig,banana and
avocado) should not be extracted since
pulp would block the blender and break the
motor.
4. Additional Advice:
(1). Please enjoy your vegetable or fruit juice
immediately, the nutrition is lost by storage
time.
(2). Please keep the juice in your mouth
30-60 seconds so that it taste better and
healthier.
14 español english français portuguese italiano deutsch
CLEANING AND MAINTENANCE
(1). Put the switch on "0" position, pull out the
power cord from the supply.
(2). Remove all components(like diagram 2-1).
Note:The appropriate method to remove
stainless steel filter is Removing the filter
base and then turning over the base,
pouring out the filter.
(3). Every detachable component can be
washed by water except for the motor
base.
(4). It is not recommended the use of corrosive
cleaner.Please use Soap and water to
clean the components, dry the parts with a
soft towel.
(5). Please be careful while cleaning the pulp
residue on the filter by nylon brush under
the water.
(6). The Plant pigments from colorful vegetable
or fruit like carrots , orange may dye the
plastic part of the product. Please clean it
after operation every time.
(7). It is not recommended to use water or
water like solvent for cleaning the motor.
Please use the slightly wet cloth or sponge
to clean the motor base.
(8). Please store the machine in a cool and dry
environment.