Installation Instructions For Ram 09-18 Models Only - Bully AS-600 Instrucciones De Instalación

English

INSTALLATION INSTRUCTIONS FOR ram 09-18 models only :

NOTE: Drilling required. Follow the drilling instructions on page 11.
Nut
(Supplement)
Mounting
Plate
Spacer
(Supplement)
10
Metal Body
Some models may need
flange to be bent down
as shown.
2.75" Bolt
(Supplement)
For applications that require hole to be drilled
1. Measure 2" from the bottom of the hole already drilled out and
1 1/16" from the edge and mark the spot.
2. Drill out the hole using a 11/32" drill bit.
3. Verify supplied screw fits thru the hole.
English
2"
1 1/16"
11