Assembly And Operation - Oh!FX HURRICANE GUN Manual De Instrucciones

ASSEMBLY AND OPERATION

1. Connect the high pressure hose (11) to the gas bottle (with a bottle adaptor with fast
coupling, or a bottle adaptor with purger... depending on the CO2 accessories supplied).
You can either use CO2 gas, CO2 liquid or even Nitrogen which is more powerful. But
only when using liquid CO2 (the bottles with a CO2 probe or pipe inside), you will have in
addition the eff ect of white smoke, as a CO2 bazooka.
2. Connect the other end of the high pressure hose (fast coupling female) to the fast coupling
male (8) of the HURRICANE GUN. Remember to always fi x the safety cable on both
edges of the high pressure hose, to the CO2 bottle and to the machine HURRICANE GUN.
3. Open the gas bottle and, without activating the HURRICANE GUN, make sure there is no
leak. Make sure that the high pressure hose is long enough to be able to shoot comfortably.
Remember to secure the bottle with tensioners to prevent a possible fall of the bottle.
4. Hold the machine fi rmly with both hands, one placed in the handle (10) and the other in
the butt of the shotgun (9). The handle can be fi xed in 3 diff erent positions according to
the convenience of the user. (that is, in a vertical position or in horizontal position for right-
handed or left-handed users)
5. Insert the short or long cartridge (3) (4) with the desired consumable inside, into the
cartridge compartment (7). The edge of the cartridge tube which is inserted in the machine
must not have any cap or stopper. The outer side of the cartridge must wear the Perforated
cap/stopper (6).
6. After blowing the confetti and/or when willing to make an eff ect of CO2, simply cover the
empty cartridge with the cap/stopper (5), (but not the perforated one). Remember that in
order to have the white smoke eff ect, you must use liquid CO2, that is the CO2 bottles with
a probe or pipe inside.
7. To shoot the Hurricane Gun, pull fi rmly the trigger (2). To blow well the confetti and maintain
it some more in the air, it is recommended to keep the trigger pull a minimum duration of
6-10 seconds.
REMARKS
• If you want to blow round confetti 55mm, insert it inside the cartridge so that the confetti
keeps fl at and well arranged inside, as if it were a package of "pringles". rackers. For any
other shape of confetti, just load it normally but without being too tightly, that is, so it can
move freely inside the cartridge.
• Remember that in order to have the white smoke eff ect, you must use liquid CO2, that is
the CO2 bottles with a probe or pipe inside.
• To obtain a nice eff ect of white cryogenic smoke, it is necessary that there is a minimum
humidity of 40% in the air. Otherwise the white smoke doesn't appears visible
3
INSTRUCTION MANUAL