Fan Only Operation (No Heat); Touch Pad Audible Beep Control - Marley Smart Serie Manual De Instrucciones

FAN ONLY OPERATION (NO HEAT)

This heater also has the option to use as a FAN ONLY device. Heat will not be
produced, but the ventilator fan will operate to provide a nice gentle breeze to
circulate the air.
1. Make sure your heat selection is low enough, or turn OFF the call for heat.
2. Touch the MODE
3. Touch the MODE
TURN OFF AUDIBLE BEEP
It may be your choice to silence the audible beep. To do so, follow these
instructions.
1. Make sure the unit is OFF.
2. Simultaneously touch the ON/OFF
displayed. 1= Beeper ON, 2= Beeper OFF.
3. Press the Up
4. Once you have made your selection between 1 or 0 then press the
lock in your selection.
Note: Should you want to turn the beeper ON again, follow the same steps above.
icon until you see the FAN icon illuminate and flash.
icon again to lock the setting in place.
or Down Icons to make a selection between 1 or 0.
and Icons until either a 1 or 0 is
Icon to
15