Chapin 8701b Instrucciones De Operación página 2

IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN
PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST
READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING.
This product contains chemicals, including lead, known to the state of California to cause birth
WARNING:
defects and other reproductive harm. Wash hands after handling.
Check to see that you have all necessary parts:
Assembly Notes
ASSEMBLY INSTRUCTIONS
1. Assemble Bottom Handle to Hopper/Wheel Assembly
1A
Using 4 nuts and 4 bolts,
secure handle bar to hopper/
wheel assembly as shown
• This Garden Seeder comes partially assembled.
You will be required to assemble the handle and row marker
to the hopper and wheel assembly.
• Before you begin assembly please lower the kickstand
at the front of the garden seeder to keep it steady
during assembly.
1B
Using a 10 mm wrench to hold nut and a 10 mm wrench to
secure bolt, tighten all 4 bolts to secure handlebar to hopper/
wheel assembly.
WARNING
1E