Electrical Connections - Hinkley 56 INDY Manual De Instrucciones

ELECTRICAL CONNECTIONS

ELECTRICAL CONNECTIONS: Be sure electricity is turned off
at the main power box before wiring.
1
Disconnect the power and remove the existing wall
plate and switch from the wall junction box. (Fig. 1)
WARNING:
To avoid possible electrical shock, be sure electricity is turned off
at the main fuse or breaker box before wiring.
Connect the fan supply (black) wire to the black
1
household supply wire as shown in Figure 2
Connect the neutral fan (white) wire to the white
2
neutral household wire (Figure 2).
After all splices are made, check to make sure there
3
are no loose strands. As an additional precaution we
suggest to secure the plastic wire connectors to the
wires with electrical tape.
08 | hinkley.com
OUTLET BOX
Fig. 1
Outlet Box
Black ("AC IN L")
Black (Motor)
Fig. 2
SWITCH
WALL PLATE
SCREWS SCREWS
White ("AC IN N")
Green or bare
copper (ground)
Ground (green)
White (Neutral)
(Connect to ground wire
on hanger bracket if no
house ground wire exists.)