Tv Operations; Turn On The Unit; Antenna Operation; External Antenna - QuantumFX PDT-91 Manual Del Usuario

TV operations

Turn on the unit

1. Press POWER switch at the right side of the unit to turn on the unit.
2. Press SWITCH button to set the unit in TV mode.

Antenna operation

External antenna

Install external antenna into antenna jack for best reception.

Basic operations

- Press SETUP button on remote control to enter TV PAGE menu.
TV AUTO SEARCHING
If first time watching, you must search effective channels.
- Press UP or DOWN navigation button to select TV AUTO SEARCH.
- Press ENTER button twice, then the unit will search channels automatically.
Wait for several minutes until searching is completed, then the first searched channel will play.
NOTE: You must do a auto search again after different system selection according to your
area.
MANUAL SEARCH
- Press UP or DOWN navigation button to select MANUAL SEARCH, then press UP or
DOWN navigation button to search channel with hand. It can search only one channel and
store it.
If you want to search another channel, you must do the operation again.
NOTE : If you want to stop the searching, just press the STOP button.
TV SYSTEM
- Press UP or DOWN navigation button to select TV SYSTEM.
- Press left or right button to exit or enter TV SYSTEM submenu.
- Press UP or DOWN navigation button to select item as desired and press ENTER button to
confirm selection.
TV TYPE
- Press UP or DOWN navigation button to select this column, then press RIGHT
navigation button to move to right side, then select your desired TV system and press enter
button to confirm.
SKIP
- Select POSITION item to choose which channel to be skipped.
- Select SKIP item, then use UP or DOWN navtigation button to set it ON or OFF.
25