Connecting Power - SOUNDMASTER PDB-1800 Manual De Usuario

Connecting Power

To connect power from inside a car, connect the supplied car adapter
to the DC IN 9-12V jack of the unit.
To connect power from household power sources, connect the
supplied power adapter to the DC IN 9-12V jack of the unit and to the
mains socket.
Caution!
When you unplug the adapter, always pull the plug from the mains
socket. Never pull the cord.
Use the supplied connecting cable to connect the DC OUT jack on one
player to the DC IN 9-12V jack on another player.
Charging the Incorporated Battery of the DVD player
The DVD player has an incorporated battery, to charge the battery,
connect the supplied power adapter cable to the DC IN 9-12V jack. The
red charge indicator light will illuminate. When the battery is fully
charged, the red charge indicator light will turn green.
NOTE:
It takes approx 4 hours to fully charge the battery. The fully charged
battery can last approx 2 hours.
Use Bracket:
1.Screw the support of the bracket on one DVD player by aligning the
support bolt to the screw hole on the
back of the player.
2.Unscrew 4 screws on the horizontal bar of the
bracket.
3.Attach the horizontal bar to the metal pins of
the headrest then secure the horizontal bar
with 4 screws.
4.Attach the DVD player with support to the horizontal
bar until a click is Heard.
5.To detach the player from the support bar, press the release buttons
on both sides of the support.
Monitor
Master
DVD player
6