RODCRAFT RC7683K Manual Del Usuario página 7

Dear customer!
Rodcraft Pneumatic Tools GmbH thanks you for the purchase of one of our products and invites you to reading this user manual.
All necessary information for an adequate use of the purchased equipment is contained herein: it is advisable to read everything from cover to cover and to
observe the references.
Please keep the user manual in good order. The contents of this manual may change without prior notice and without further obligations, so that changes
and improvements can be inserted into already distributed copies.
It is our aim to manufacture products, with which you can work as safe and effi cient as possible. Most important for your safety are your caution and
judgment in handling this product and other tools. These safety precautions contain some of the important sources of danger; however, they cannot cover all
possible risks.
Without prior written permission of the manufacturer copying or translation of any part of this manual is prohibited.
Model Drive
Spindel Disc [mm]
5/16''-
RC7683 24 UNF 75 (3")
FT
FT = fi letage femelle
2. Application and Function
• A polisher is a tool used for polishing surfaces by means of a polishing pad or polishing fl eece in order to achieve a desired fi nish.
• A polisher should only be used to polish surfaces with a polishing pad or polishing fl eece and must never be used in any other way.
• Do not misuse the polisher.
• Please read the product safety information carefully!
3. Inspection – Scope of Delivery
Open the packing and check the equipment for transport damage and that all parts specified in the shipping documents are at hand. Before using the
equipment conduct a visual inspection in order to determine leakages, damages, loose or missing parts.
Scope of delivery:
1 x
1 x
1 x
1 x
1 x
1 x
1 x
1 x
1 x
1 x
1 x
Power Speed Weight
[W] [min -1 ] [kg]
225 5500 0.6
pression max 6,3 bar (90 psi)
RC7683K
Smart Repair polisher
Wrench 12/17 mm
Dehumidifi er packet
User manual
Safety instructions
EC Declaration of Conformity
Spare part list
3" polishing disc 5/16"-24UNF
3" polishing pad, yellow
3" polishing pad, white
3" polishing fl eece
RODCRAFT PNEUMATIC TOOLS GmbH
EN
a
b b
Air Consumption
Hose Dimensions
average –
Diameter axbxc
continuous
[mm] [mm]
8 120x125x42 360
RC7683
1 x Smart Repair polisher
1 x Wrench 12/17 mm
1 x Dehumidifi er packet
1 x User manual
1 x Safety instructions
1 x EC Declaration of Conformity
1 x Spare part list
1 x 3" polishing disc 5/16"-24UNF
Sound-
Air Inlet
pressure LpA
[l/min] [Inch] [dB(A)]
480 1/4'' FT 78.5
Sound-
Vibration
power LwA
[dB(A)] [m/s 2 ]
89.5 3.8
7