Caractéristiques Techniques; Déclaration De Conformité Ue - Chicago Pneumatic CP7215 SERIES Manual Del Operador

Lubrication
Use an air line lubricator with SAE #10 oil, adjusted to two
(2) drops per minute.
Maintenance instructions
• Follow local country environmental regulations for
safe handling and disposal of all components.
• Maintenance and repair work must be carried out by
qualified personnel using only original spare parts. Con-
tact the manufacturer or your nearest authorised dealer
for advice on technical service or if you require spare
parts.
• Always ensure that the machine is disconnected from en-
ergy source to avoid accidental operation.
• Disassemble and inspect the tool every three 3 months if
the tool is used every day. Replace damaged or worn
parts.
• To keep downtime to a minimum, the following service
kit is recommended : Tune-up kit
Disposal
• The disposal of this equipment must follow the legisla-
tion of the respective country.
• All damaged, badly worn or improperly functioning de-
vices MUST BE TAKEN OUT OF OPERATION.
• The disposal of this equipment must follow the legisla-
tion of the respective country.
• Repair only by technical maintenance staff.
Useful information
Website
Log in to Chicago Pneumatic: www.cp.com.
You can find information concerning our products, acces-
sories, spare parts and published matters on our website.
Country of origin
Taiwan
Copyright
© Copyright 2018, CHICAGO PNEUMATIC Tool Co. LLC,
1815 Clubhouse Road, Rock Hill, SC 29730
All rights reserved. Any unauthorized use or copying of the
contents or part thereof is prohibited. This applies in particu-
lar to trademarks, model denominations, part numbers and
drawings. Use only authorized parts. Any damage or mal-
function caused by the use of unauthorised parts is not cov-
ered by Warranty or Product Liability.
6
Caractéristiques techniques
CP7215
CP7215E
CP7215CV
CP7215CVE
CP7215SV
CP7215SVE
CP7225
CP7225E
CP7225CV
CP7225CVE
CP7225SV
CP7225SVE
CP7255
CP7255E
CP7255CV
CP7255CVE
CP7255SV
CP7255SVE
Déclarations
DÉCLARATION DE CONFORMITÉ UE
Nous, CHICAGO PNEUMATIC Tool Co. LLC, 1815
Clubhouse Road, Rock Hill, SC 29730, déclarons sous notre
seule et entière responsabilité que le produit (dont le nom, le
type et le numéro de série figurent en première page) est en
conformité avec la ou les directives suivantes :
2006/42/EC (17/05/2006)
Normes harmonisées appliquées :
EN ISO 11148-8 : 2012
Les autorités peuvent obtenir les informations techniques
pertinentes en s'adressant à :
Pascal Roussy, R&D Manager, Ets Georges Renault, 38 rue
Bobby Sands, BP10273 44818 Saint Herblain, France
Saint-Herblain,
Pascal ROUSSY
Signature du déclarant
Utilisation prévue
Ce produit est conçu pour l'enlèvement de matière et le polis-
sage à l'aide d'abrasifs appliqués ou d'accessoires de polis-
sage. Aucune autre utilisation n'est autorisée. Pour utilisation
professionnelle uniquement.
© Chicago Pneumatic - 8940163475
Random orbital Sanders
Vitesse à vide (tr/ Poids (k
min) g)
12000 0.79
12000 0.79
12000 0.83
12000 0.83
12000 0.82
12000 0.82
12000 0.79
12000 0.79
12000 0.83
12000 0.83
12000 0.82
12000 0.82
12000 0.79
12000 0.79
12000 0.83
12000 0.83
12000 0.82
12000 0.82
Poids (l
b)
1.74
1.74
1.83
1.83
1.84
1.84
1.74
1.74
1.83
1.83
1.84
1.84
1.74
1.74
1.83
1.83
1.84
1.84