Technical Information - Telefunken HCCV11 Manual Del Usuario

Your steam station is equipped with Auto Clean function. It allows an automatic scales
cleaning on the iron. You have to start the cleaning when you'll hear the 5 « bips » from
the warning sound indicator. The warning sound indicator is programmed to warn you
between 2 and 4 months of use depending on your ironing frequency.
As soon as you hear the 5 bips, bring your appliance close to a tap sink. Switch on the
appliance and set the thermostat button to
times the steam joystick and gently shake the iron to flush out the scales during 1 minute.
At the end of the Auto Clean process, let the appliance cool down completely before storing
it back.
Importants :
 Empty the water tank of the remaining water.
 Wipe flakes and any other deposits on the soleplate with a damp cloth or a non-
abrasive (liquid) cleaner. Clean the upper part of iron with a soft damp cloth. Wipe the
water drop on the steam station iron and the thermal insulating cushion with dry cloth.
 Do not use chemical, steel, wooden or abrasive cleaners to scrape the soleplate.
 Never use sharp objects to remove the deposits of the sole.
 Never hold the iron or the base unit under the tap water.
WARNING: Always unplug your appliance before starting any cleaning
operation. Do not use any toxic, solvent, industrial or harsh cleaning
products to avoid damaging your appliance. Never put your appliance under
water. Always ensure that the appliance and its accessories are well
assembled back into their location before starting to reuse your appliance.

TECHNICAL INFORMATION

Model
Rated Voltage
Power
Water tank capacity
Steam pressure
Steam rate
"Auto Clean" function
●●.
HCCV11
220-240V ~ 50Hz/60Hz
2000-2400W
1.2L
4.5 bars
120gr/min
8
Hold your iron above the sink, press 2
ENGLISH