NuWave PIC Gold Guia De Inicio Rapido

Wattage and Amps
Power Setting Wattage Setting
600W
Max/Sear
5 Amps 7.5 Amps
Based on line voltages registering 120V.
Changing Wattage Setting
The PIC Gold operates at a default of
1500 watts. If you use the PIC Gold in a
location with limited wattage, you can
adjust the PIC Gold's wattage by pressing
until you reach the desired power.
Watts
When cooking at lower wattages,
your cooking time may increase slightly.
Changing Cooking Time
While Cooking
To cook for a specific time or longer than
1 hour. Ex: 3 hours and 45 minutes.
1. Press twice to
Time
set column one, then
press 5 times to
set for 5 minutes.
2. Press
again
Time
to set column two,
then press 4 times
to set for 4 minutes.
3. Press again to
Time
set column three,
then press 3 times
to set for 3 hours.
The flashing digit is the number being altered.
Copyright ©2017 by NuWave, LLC. All rights reserved. www.nuwavenow.com
Quick Start
Press
show a temperature of
900W 1,500W
and will default to cook for 1 hour.
12.5 Amps
Pause
Press
The display will clear after 45 minutes.
Resume
Press
Stop
Press
Changing Fahrenheit to Celsius
Press
Press
Press
Press
Stage/Programming Cooking
Program the PIC to cook at different
temperatures for different amounts of time.
Ex: High for 5 Min. then Low for 3 Min.
1. Press
Step 1
2. Press
5
press
3. Press
press
Step 2
4. Press
45
You can add additional stages by just repeating
steps 2 or 3 with your desired temperature and
Step 3
time before pressing
3 45
PIC
Quick Start Guide
and the display will
Start
375F/191C
once to pause cooking.
Pause
Clear
to resume cooking.
Start
twice to clear.
Pause
Clear
once.
Prog
once to display Fahrenheit.
again to display Celsius.
to finish.
Pause
Clear
to set the stages.
Prog
then press , and then
High Time
5 times for 5 minutes at High.
then press and then
Low
Time
3 times for 3 minutes at Low.
to begin cooking.
Start
.
Start
Gold
®
Adjust Cooking Temperature
Increase/decrease the temperature
manually by selecting 1 of the 6
temperature settings, or by pressing
or to adjust the temperature
by 10-degree increments.
Easy Temperature Settings
Press Temperature
Button Range
Low 100°F (38°C)
Med/Low 175°F (79°C)
Med 275°F (135°C)
Med/High 375°F (191°C)
High 425°F (218°C)
Max/Sear 575°F (302°C)
Delay Cooking
How to program the PIC to delay cooking.
Ex: Delay cooking for 6 minutes, then
cook on High for 3 minutes.
1. Press to set the delay.
Prog
2. Press
then press
Time
to delay for 6 minutes.
3. Press then press
Prog
Press and then press
Time
times to cook for 3 minutes.
4. Press
to begin cooking.
Start
Item No. BQ 30200 Rev. 07 TH 11-22-17
Examples
Warm
Simmer
Steam
Stir/Deep-Fry
Boil/Saute
Sear
6 times
.
High
3