Before Operation; Turning The Power On And Off; Hold Function; Using The Jog Button - Sanyo DMP-M1200 Manual De Instrucciones

Turning the power on and off

Press the a/n (POWER) button long (for at least 2 seconds). "Loading...."
then "WELCOME" appears briefly on the LCD display and the power
turns on.
Then the last selected file/folder or FM station appears.
Example:
Press the a/n (POWER) button long again. "POWER OFF" appears and the power turns
off.

Hold function

This prevents operation from stopping by accidentally pressing a button.
Set the HOLD a switch to the right. "HOLD" appears and the
hold function is engaged.
• If an operation button is pressed while the hold function is
engaged, "HOLD" will appear and nothing else happens.
Set the HOLD a switch to the left. The hold function is disengaged.

Using the Jog button

Press the button at the center or press upward/downward/left/right.
19

Before operation

[ENGLISH]