Updating The Software; Technical Specifications; Cleaning And Maintenance - American Pro TECSHOW NAVIGATOR PLUS+ Manual Del Usuario

"Send File". If using Hyper Terminal, call the version that
you created for NAVIGATOR PLUS. Click on "Transfer" on
the top menu bar and select "Send Text File". A dialog
box will appear allowing you to select the NAVIGATOR
PLUS text file that you made when you saved the me-
mory. Find the drive and folder where you created the
file if it is not in the current window, select the file and
click on "Open". Hyper Terminal will begin to transmit
the file. The NAVIGATOR PLUS display will read "recei-
ving file". After the file has been sent, NAVIGATOR PLUS
will restart and show its startup display. If any errors have
been detected, NAVIGATOR PLUS will prompt you to re-
try. Check your connections and try again. The length
of time it takes to update the memory will vary depen-
ding on the amount of memory in use at the time it was
recorded.

11.4.UPDATING THE SOFTWARE

To copy the new software file from your PC to NAVIGA-
TOR PLUS, go to the NAVIGATOR PLUS menu selection la-
beled "update software". Press "enter" and the display
will read, "Download new program".
NAVIGATOR PLUS is now ready to receive the file from
your PC. As an alternative you can access this menu
by holding down the "menu" and "erase" switch while
powering up NAVIGATOR PLUS.
If you are using SD Backup, follow the instructions for
"Send File". If you are using Hyper Terminal, call the
version that you created for NAVIGATOR PLUS. Click on
"Transfer" on the top menu bar and select "Send Text
File". A dialog box will appear allowing you to select the
text file that you downloaded from the web site. Make
sure that the file has been unzipped before trying to use
it (the file will end with .txt not .zip). Find the drive and
folder where the file is located, select the file and click
on "Open". Hyper Terminal will begin to transmit the file.
The NAVIGATOR PLUS display will read, "receiving new
program". After the file has been sent, NAVIGATOR PLUS
will restart and show its startup display. If any errors have
been detected, NAVIGATOR PLUS will prompt you to re-
try. Check your connections and try again. It will take
several minutes to transfer the file.
PAG. 26

12.TECHNICAL SPECIFICATIONS

•Total number of control channels: 512
•Maximum number of Chases: 256
•Maximum number of Scenes: 1024
•Maximum number of Shows: 256
•Maximum number of Presets: 512
•Control 16 fixtures of up to 32 channels each
•32 character backlit LCD display for easy
programming
•Joystick for Pan/Tilt movement
•Large rotatory wheel for data entry
•8 faders
•Power supply: 120/230V via external Power Supply 9 V
DC/500 mA
•DMX 512 output connector: 3-pin XLR female
•Polarity Switch
•RS-232 for PC connection or trackball,
•RCA Audio input
•Midi-In, Midi-Out port
•Rack size: 19" rack mountable,3 spaces
•Weight: 3.2 kg
•Dimensions LxWxH (mm): 483x133x120

13.CLEANING AND MAINTENANCE

DANGER !
Disconnect the device from the mains before starting
any maintenance work
There are no user-serviceable parts inside the device.
Maintenance and servicing should be carried out by
authorized personnel only.
When cleaning the controller do not use cleaning solu-
tions or aggressive detergents which may damage the
surface! Rather use a soft and damp cloth.