Hardware Reset; Technical Support - Kensington Presentair Manual De Inicio Rápido

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21

Hardware Reset

If the device stops functioning properly
or has become unresponsive, perform a
hardware reset by pressing the reset button
gently using a small paperclip. The front
LED blinks once during reset.
CLASS 2 LASER SAFETY STATEMENT
A set of warning labels in different
1. Emission of a parallel beam of visible light;
languages is provided with this product.
It is essential that the correct
2. Maximum Power of 1 milliwatt CW, wavelength
country-specific warning label is applied to
the laser pointer for the safety of the user
range 650±20 nanometers;
and of the people nearby.
3. Operating temp between 0 ° C (32° F) to 40° C
(104° F).
• Do not disassemble the device
• Do not use the device outside of its specified
operating temperature range. If the device is
exposed to an environment outside of its
prescribed operation, turn off the device and
allow the temperature to stabilize within the
specified operating range before using the
device.
This laser device complies
with International Standard
IEC/EN 60825-1: ED 2. 2007,
Class 2 Laser Product and
also complies with 21 CFR
1040.10 and 1040.11,
except for deviations
pursuant to laser Notice No.
50, dated June 24, 2007:
8
ATTENTION!
A set of warning labels in different
languages is provided with this
product. It is essential that the
correct country-specific warning
label is applied to the laser pointer
for the safety of the user and of the
people nearby.
CAUTION!
This device has no serviceable parts.
Use of controls or adjustments or
performance of procedures other
than those specified herein may
result in hazardous radiation
exposure.
Need More?
For additional instructions and disclosures,
see the full Instruction Guide online at:
www.kensington.com/manuals

Technical Support

Technical support is available to all
registered users of Kensington products.
Web Support
You may find the answer to your problem
in the Frequently Asked Questions (FAQ)
section of the Support area on the
Kensington Website:
www.support.kensington.com.
Telephone Support
There is no charge for technical
support except long-distance charges
where applicable. Please visit
www.kensington.com for telephone
support hours.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido