Faber IN-LIGHT EV8 BK Manual De Instrucciones página 6

4. CONTROLS
L
Function
Key
Short press: the lights alternate between high intensity, medium intensity (if
L
present) and off.
If there is an induction cooktop coupled with the hood and the hood is off, as
soon as the induction cooktop is turned on, the hood lights automatically turn on
at the maximum intensity.
Delay Function
Long press:
Activates/Deactivates the Delay function (automatic shutdown of the Motor and of
the lighting delayed by 30').
Cannot be activated with Intensive or 24h function.
K-Link coupling
Before starting the procedure follow the specific instructions of the manuals of the
devices to be coupled.
Long press when all loads are off (Motor+Light):
starts the pairing procedure between the hood and compatible K-Link devices (in-
duction cooktop or remote control). Up to 3 induction cooktops can be paired and
only one remote control. See the manual of the devices for details of the opera-
tions that need to be performed on these.
The coupling procedure takes 2 minutes. If no devices are recognised within this
time check that you have previously activated the procedure for the devices to be
coupled. The maximum number of linkable devices may have been reached.
Turns the motor on/off at the first speed.
T1
Long press:
Activates/Deactivates the Activated Carbon Filters alarm.
Note: perform the operation with the lights on only (motor off).
K-Link uncoupling
Long press when all loads are off (Motor+Light):
starts the procedure for the cancellation of all compatible K-Link devices previ-
ously paired with the K-Link Coupling function.
Turns the motor on/off at the second speed.
T2
24h Function
Long press:
Activates/Deactivates the motor in the 24h Air Exchange mode, a speed that al-
lows suction of 10 minutes every hour, for a 24-hour cycle.
Cannot be activated if the Intensive or Delay modes are active.
6
T1 T2 T3 T4
LED
-
Flashing
LEDs T1 and T2 flashing:
coupling in progress.
Upon successful completion
of the procedure LEDs T1
and T2 will light up for 2
seconds.
Fixed
All LEDs flash twice:
alarm activated.
All LEDs lit for 1 second:
alarm deactivated.
Upon successful completion
of the procedure LEDs T1
and T2 flash 5 times.
Fixed
Flashing
S1