Battery operation
Note: In battery mode the fan speed is
limited to position 15. Depending on the
settings, the battery will last max.18 hours.
Lower the ventilation speed and activate
night mode to increase battery life. See below
comparison chart for reference:
Fan speed
Oscillation
1
Off
Horizontal or Vertical
Horizontal & Vertical
5
Off
Horizontal or Vertical
Horizontal & Vertical
10
Off
Horizontal or Vertical
Horizontal & Vertical
15
Off
Horizontal or Vertical
Horizontal & Vertical
* For reference only. Test environment conditions: 18⁰C, 48% humidity.
12
Battery life*
18 H
8 H
5.5 H
15.5 H
6.9 H
4.7 H
11.8 H
5.6 H
3.9 H
8 H
4.7 H
3.1 H
Operating instructions
Remove the parts from the packaging
1
and assemble the device according to the
instructions in this manual.
Connect the power cable to the input terminal
2
in the base of the product. Then insert the plug
into the wall socket. The LED display will light
up and show '00'.
Press the control ring once, to turn the product
3
on. The fan springs into life and will thereafter
default to the most recent speed setting.
Use the stainless steel exterior of the
4
aluminium control ring to switch between
settings.
When a display icon is flashing, you
5
Power
Timer Up
Ventilation speed down
Timer down
Horizontal oscillation
can set and adjust this setting by pressing
the control ring. When the desired position
is reached, press the control ring again to
confirm the selection.
When setting the fan speed and timer function,
6
the LED display will continue to flash until the
desired setting is selected. After this, press the
control ring again to confirm the selection.
Once the function is set, the icon will stop
7
blinking and will remain visible in the display,
for as long as this function is set to on.
Press and hold the control ring to switch off
8
the device.
Night mode
Natural wind
Ventilation speed up
Vertical oscillation
13