Low Battery Indicator - Pulsar EPS3I Instrucciones

3
Charging
Connect the plug (1) of a Battery pack
(Pic.1; 3).
Plug the charger plug (4) into AC mains. Package includes a charger with
a plug standard for specific country. The LED light of the charger will glow
red to indicate charging.
When the Battery pack is fully charged, the LED light changes to green.
Disconnect the charger from the Battery pack and from the AC mains.
15
16
17
Charging the EPS3I from car battery
Connect the plug (1) of a Battery pack to the jack (8) of the car adapter
(9) (Fig.1).
Plug the car adapter (9) to the car lighter (10) of your car.
The LED light of the car adapter will glow red to indicate charging, green
to indicate the battery is charged.
3
(2) to the jack (3) of the charger (4)
10
9

Low battery indicator

The EPS3I Battery Pack is equipped with a LED low battery indicator
(16) located on the battery's front panel.
To check battery level, press and hold the button (15).
Five red LEDs glow: battery charge is maximum.
One red LED glows: battery charge is minimum.
Connecting to digital NV devices
7
Connect the plug (1) of a Battery pack to the external power supply jack (5).
Turn on your NV device.
The built-in mount enables the EPS3I to be affixed to a Weaver rail of digital
NV device (see fig. 2). If a device does not have a Weaver rail, the EPS3I can
be affixed with the help a ¼" tripod socket adapter.
To do this, screw the ¼" tripod socket adapter into the tripod socket of a NV
device and attach the EPS3I to the Weaver rail of the tripod socket adapter.
Tighten the knob (17) of the EPS3I
Note: the supplied extension cable enables the EPS3I Battery pack
to be connected to a device and to be put into a pocket or any other suitable
place.
The EPS5 is equipped with an adjustable strap which allows it to be affixed to a
tree, rifle's foregrip etc.
Connector for devices with car lighter adapter (for the EPS5)
This connector is able to provide self-contained power supply for various
external devices, such as GPS navigator, FM modulator, mini TV set, cell
phone etc. In this case the EPS5 Battery Pack functions as a car battery.
Operation time of an external device depends on the capacity of a battery
pack, current consumption of an external device and climatic conditions.
Connect the plug (1) of a Battery pack to the jack (11) of the car lighter
adapter (Fig.3).
Connect the car adapter (13) to the jack (12) of the connector.
Connect the second plug (14) of the car adapter to an external device.
11
mount .
14
12 13
4