Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Product Overview
The Micro Mini Gigabit fiber to 10/100/1000BASE-T and Fast Ethernet fiber to
10/100/1000BASE-T media converters are ideal for mobile applications where light
weight, compact size and low power are critical requirements.
These units deliver plug-and-play set up with an RJ-45 port that auto-negotiates the
speed, duplex mode and cross-over functions for laptops with 10BASE-T, 100BASE-TX
or 1000BASE-T Ethernet.
Installation Procedure
1) Connect Cables
a.
The Micro Mini Converters can be wall mounted using the optional wall mount
bracket (LMC400-WALL) or placed on a flat level surface.
To power the module using the USB cable, connect the USB Standard Type A
connector to a USB port on the computer. Then connect the USB Micro-B connector
at the other end of the cable to the connector on the back of the media converter.
Confirm that the module has powered up properly by checking the power status
LED located on the top of the module.
To power the module using the AC/DC adapter, connect the USB Standard Type A
connector to the AC/DC adapter and connect the AC/DC adapter to the AC outlet.
Next, connect the USB Micro-B connector at the end of the cable to the connector on
the back of the media converter. Confirm that the module has powered up properly
by checking the power status LED located on the top of the module.
b.
Connect the UTP port via a Category 5 or better cable to a 10BASE-T, 100BASE-TX
or 1000BASE-T Ethernet device.
c.
When using fixed fiber port models, connect the appropriate multimode or single-
mode fiber cable to the fiber port of the installed module. It is important to ensure
that the transmit (Tx) is attached to the receive side of the device at the other end and
the receive (Rx) is attached to the transmit side. Single-fiber (SF) media converter
models operate in pairs. The Tx wavelength must match the Rx wavelength at the
other end and the Rx wavelength must match the Tx wavelength at the other end.
When using an SFP model, insert the SFP Fiber transceiver into the Port 1 SFP
receptacle on the module.
NOTE: The release latch of the SFP Fiber transceiver must be in the closed (up)
position before insertion.
2) Verify Operation
Once the module has been installed, verify the module is operational by viewing the
LED indicators.
Micro Mini Converter
724-746-5500 | blackbox.com
LMC400 Series
LMC4000 Series
Page 1
Publicidad
Manuales relacionados para Black Box LMC400 Serie
Resumen de contenidos para Black Box LMC400 Serie
- Página 1 LMC400 Series LMC4000 Series Micro Mini Converter Product Overview The Micro Mini Gigabit fiber to 10/100/1000BASE-T and Fast Ethernet fiber to 10/100/1000BASE-T media converters are ideal for mobile applications where light weight, compact size and low power are critical requirements. These units deliver plug-and-play set up with an RJ-45 port that auto-negotiates the speed, duplex mode and cross-over functions for laptops with 10BASE-T, 100BASE-TX or 1000BASE-T Ethernet.
- Página 2 LED Function Color OFF State ON/Blinking State “Legend” Power Green No power ON: Module has power “PWR” Fiber Link Activity ON: Fiber link Green No fiber link “F/O” Blinking: Data activity UTP Link Activity ON: Port linked at 10M Green No UTP link “10”...
-
Página 3: Ordering Information
Micro Mini Converter Ordering Information US Power Supply Model Fiber Speed Fiber type Distance LMC400A 100M LMC401A 100M 1310nm, MM, ST 5km / 16,400 ft. LMC402A 100M 1310nm, MM, SC 5km / 16,400 ft. LMC403A 100M 1310nm, SM, ST 30km / 18.6 mi. LMC404A 100M 1310nm, SM, SC... -
Página 4: Nom Statement
NOM Statement FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference... - Página 5 Micro Mini Converter 5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc.. 6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean recomendados por el fabricante.
- Página 6 Micro Mini Converter 17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación. 18. Servicio por personal calificado deberá ser provisto cuando: A: El cable de poder o el contacto ha sido dañado; u B: Objectos han caído o líquido ha sido derramado dentro del aparato; o C: El aparato ha sido expuesto a la lluvia;...
- Página 7 NOTES Page 7 724-746-5500 | blackbox.com...
- Página 8 724-746-5500 or blackbox.com. About Black Box Black Box Network Services is your source for an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 30 seconds or less.