Assembly - Pacific Casual 181-831-REC-KD-SI Instrucciones De Montaje Y Uso

Assembly

1
Attaching the back panel
□
Place the chair base (A) on a flat, smooth surface.
□
Hold the back panel (B) close to the rear support bars (1) of
the recliner mechanism.
□
Adjust the gap between the two support bars (1) to match
the gap between two slots (2) on the back panel. (Step 1.1)
□
Slide the two support bars (1) into the two slots (2)
until two audible clicks are heard. (Step 1.2)
2
Placing cushions
Level the chair with foot glides at the bottom of chair legs if necessary.
□
□
Place cushions (C) and (D) on the chair.
B
A
4
2
Step 1.1
Step 1.2
C
D