Steren HER-205 Manual De Instrucciones página 15

PIECES FUNCTION
DO NOT use the pieces on iron.
SPECIFICATIONS
Input: 5 V - - - 500 mA (x USB)
Internal battery: 3, 7 V - - - 600 mAh
Maximum autonomy: 100 min
Speed: low 5 000 rpm, medium 10 000 rpm, high 15 000 rpm
Mini drill diameter: Ø 2.4 mm / Ø 3.2 mm
For fine works of detail, engraving, carving, retouching
and finishing. Use them in wood, jade, ceramics, glass and
semiprecious stones. The tips are covered with diamond
particles.
To engrave and style wood, fiberglass, plastic or soft
metal.
Are used for the surface treatment of metal pieces, pieces
of molten metal, welding seams and for the rust elimina-
tion.
It is used to clean the dust after engraving or sculpting.
It is used with sandpaper and serves to shape and soften
metal or plastic surfaces.
6