Chauvet DJ FlareCON Air Guía De Referencia Rápida página 7

FlareCON™ Air QRG
Finding The Name
Of The
FlareCON™ Air
Wi-Fi™
Connecting To
The FlareCON™
Air Wi-Fi™
Connecting To A
DMX Console
Controlling DMX
Lights
To find the name of the FlareCON™ Air Wi-Fi™, do the following:
1. Make sure the product has power. The red light will be on and the display
will be lit.
2. Make sure a channel is selected and the input mode is set to WIFI.
3. Press <MENU> until Information shows in the display.
4. Press <ENTER>. The current Wi-Fi™ name and channel number will show
in the display. Use this Wi-Fi™ name when connecting to mobile devices.
5. Press <MENU> to exit the Information menu function.
To connect a mobile device to the FlareCON™ Air Wi-Fi™, do the following:
1. Make sure the FlareCON™ Air has power. The red light will be on and the
display will be lit.
2. Make sure the input mode is set to WIFI.
3. Use the Settings function of the mobile device to connect it to the
FlareCON™ Air Wi-Fi™.
4. Open the FlareCON™ app. The word Online should show in the center of
the screen.
Information about connecting to a wireless network can be found in the
device's manual.
The name of the FlareCON™ Air Wi-Fi™ can be changed with the
FlareCON™ app. See the FlareCON™ User Manual for more information.
User Manuals are available at
manuals-literature/.
Connect a DMX console only after the FlareCON™Air has been configured for
DMX input. See Selecting A Signal Input
DMX Out of the console to the DMX In of the FlareCON™Air.
Operating DMX consoles
information about operating a DMX console, see the User Manual for that
console. User Manuals are available from the CHAUVET® web site:
http://www.chauvetlighting.com/product-manuals-literature/.
FlareCON™ Air can wirelessly control DMX lights when it is used with a D-Fi™
Hub. Information about using the D-Fi™ Hub can be found in the manual on the
CHAUVET® website: http://www.chauvetlighting.com/product-manuals-literature/.
To configure a system that uses ta FlareCON™ Air and a D-Fi™ Hub to
wirelessly control DMX lights, do the following:
·
The FlareCON™ Air can take wireless or DMX input. See
Input Mode.
http://www.chauvetlighting.com/product-
Mode. Connect a DMX cable from the
is not covered
7
in this document.
Selecting A Signal
EN
For