Using The Remote Control - GE AKCQ08ACA El Manual Del Propietario

Using the Air Conditioner
Starting the Air Conditioner (Cont.)
TEMP/TIME
1. Press the TEMP/TIME up arrow button to raise the
temperature. Each time you press the TEMP/TIME up
arrow button, the temperature will go up 1°F until it
reaches 86°F (30°C).
2. Press the TEMP/TIME down arrow button to lower the
temperature. Each time you press the TEMP/TIME
down arrow button, the temperature will go down 1°F
until it reaches 61°F (16°C).

Using the Remote Control

NOTE: The raised dots are Braille for the
visually impaired.
Remote control may differ in appearance
from the image shown.
NOTE: Remove and discard protective film
prior to use. The remote control runs on
one CR2025 battery (included). Replace
battery after 6 months of use, or when the
remote control starts to lose power. To
change battery, remove screw on back
panel of remote to remove cover.
POWER
Press ON/OFF to turn on the air
conditioner.
Mode
Press MODE to choose Fan, Eco, Cool or Dehum.
Speed
Press SPEED to choose High, Med, Low.
TIMER
To set the air conditioner to turn off after a set amount
between 1 hour and 24 hours (unit must be ON):
1. Press TIMER. Timer OFF indicator light on the air
conditioner control panel will be on.
2. Press the TEMP/TIME up or down arrow button to
change the delay time from 1 hour to 24 hours.
3. After 5 seconds, Timer OFF indicator light on the air
conditioner control panel will remain on.
6
NOTE: After 5 seconds, under Fan mode, the display
will show the current temperature. Under Cool, Eco or
Dehum mode, the display will show the set temperature.
FILTER RESET
This feature automatically notifies you that the air filter
must be cleaned. The indicator light will come on after
240 hours of operation. Clean the air filter (refer to Care
and Cleaning), place it back in the front panel, and press
the Filter Reset button. The light will turn off.
TO SET THE AIR CONDITIONER TO TURN ON
ON/OFF
BETWEEN 1 HOUR AND 24 HOURS:
1. Press TIMER. Timer On indicator light on the air
MODE
conditioner control panel will be on.
2. Press the TEMP/TIME up or down arrow button to
SPEED
change the delay time from 1 hour to 24 hours.
DELAY
3. After 5 seconds, Timer On indicator light on the air
conditioner control panel will remain on.
TEMP/TIME
TO CLEAR TIMER PROGRAM:
TEMP/TIME
NOTE: Air conditioner can be either on or off.
Press TIMER until Timer indicator light turns off.
TO VIEW OR CHANGE THE REMAINING TIME (IN
HOURS):
TIMER OFF
1. Press the TEMP/TIME up or down arrow button to
increase or decrease the time.
2. After 5 seconds, the display will show the remaining
time to Timer OFF.
TIMER ON
1. The display will show the remaining time.
2. Press the TEMP/TIME up or down arrow button to
increase or decrease the time.
TEMP/TIME
1. Press the TEMP/TIME up arrow button to raise the
temperature. Each time you press the TEMP/TIME up
arrow button, the temperature will go up 1°F until it
reaches 86°F (30°C).
2. Press the TEMP/TIME down arrow button to lower the
temperature. Each time you press the TEMP/TIME
down arrow button, the temperature will go down 1°F
until it reaches 61°F (16°C).
49-7845 Rev. 0