Playback Options - KLIM discman Manual Del Usuario

Charging the player
This product is equipped with
one charging cable. You can use
any charger that supports USB
2.0 protocol or standard USB
charger to charge the player.
Charging time: It takes around
4 hours to fully charge the
player (this varies depending
on the power output). When the
battery is being charged, the LED indicator is red. Once the player is
fully charged, the LED indicator will turn green.

PLAYBACK OPTIONS

How to setup REPEAT mode
Each time the MODE button is pressed, the order of the tracks
played will be as follows: Repeat 1(REP1) will loop a single track.
Repeat all (ALL) loops the playlist. Shuffle (SHUF) randomly plays
tracks, Preview (INTRO) plays only the first 10 seconds of each track.
Saving track presets
Use the PROG (4) button to enter the programming mode. Press
STOP (8), then select the track you want to program using the
Next/Previous buttons. Press PROG (4) to assign the track. Press
PROG (4) again to assign the next track, and repeat the process to
assign up to 30 pre-selected tracks. At any point, press the PLAY (7)
button to enter the programming play mode. Press the STOP (8)
button directly to enter the stop mode to cancel or reprogram.
8
4
How to play an MP3 disc
Press DIR (3) to choose different folders if there are multiple folders
on the inserted disc.
4
5 6
7
3