CSL 310 Manual De Usuario página 10

7 Button functions
Button
Multifunction button
Increase volume
Decrease volume
8 Connecting via Bluetooth
Make sure the headphone is off.
Press and hold the „multifunction button" for approx. 10 seconds until the device
is ON and the LED indicator next to the "multifunction buttton" flashes red and
blue.
Activate Bluetooth on the device that you want to link with the headphone.
Perform a search and connect to device "CSL-310 BW". Enter "0000" if a safety
code is requested.
Note: The Bluetooth pairing mode is deactivated for safety reasons when
no connection has been established after several minutes. Please repeat the
steps described above when pairing has failed.
Please note!
9 Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact
with mains voltages. Do not short-circuit the product. The device is not certified
for use in the open air; only use it in dry conditions. Protect it from high humidity,
water and snow. Keep it away from high temperatures. Do not subject the de-
vice to sudden changes in temperature or heavy vibration as this might damage
electronic components. Examine the device for damage before using it. The unit
should not be used if it has received an impact or has been damaged in any other
way. Please observe national regulations and restrictions. Do not use the device
10
Functions
• Press once: answer call, end call, play / pause
• Press twice: Redial the last called contact
• Press and hold: Increase volume
• Press once: Next track
• Press and hold: Decrease volume
• Press once: Previous title
English