Charging The Battery - Panacom BL-1353HS Manual Del Usuario

FONCTION OF LED INDICATOR
A. When charging
RED LED is on when the battery is charging. RED LED is off when
battery charge is finished.
B. When using the headphone
RED and BLUE LED blink alternately when the headphone is in
pairing mode. BLUE LED bright when there is no phone conver-
sation.
RED LED gradually turns on and off every 5 second during phone
conversation. "No battery" sound alert when the battery has low
power.

CHARGING THE BATTERy

The headset comes with a built in rechargeable battery. Before
using it for the first time we recommend you charge the battery
fully. Only use the supplied USB Cord to charge the headset.
Please charge for 4 hours.
Connect the micro USB connector of the charging cable into
the micro USB port on the side of the headphone. Connect the
other end of the USB cable to your computer's USB port or to an
optional USB wall charger (not included)
The RED LED indicator light is illuminated.
The RED LED indicator light shuts off when the speaker is fully
charged. (Approximately 4 hours).
Pg. 6