Publicidad
FIGURE 1
A
STEP 1 - Figure 1
Begin assembly by connec�ng Leg
Extension (B) to Headboard (A) using
2 Allen Bolts (3) & 2 Flat Washers (4).
Tighten all bolts using Allen Wrench
(8) provided.
B
STEP 2 - Figure 2 (For Queen Size Only)
A�ach Bed Frame (*Not Included) to each Extension Leg (B) using 2 Allen Bolts (1) from the back side,
2 Flat Washers (4), 2 Spring Washers (5) & 2 Hex Nuts (6) per each side. Tighten all bolts only using
Allen Wrench (8) provided. Tighten nuts with Open Wrench (7) provided.
Discard remaining hardware ONLY IF this for Queen Size Headboard. See Steps 3 & 4 for Full Size Assembly ONLY.
CARE & MAINTENANCE: The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
Pearson Metal Headboard
4
3
B
Model #2407-490
A
B
B
B
1
1
4
FIGURE 2
4
Bed Frame
not included
Date: 08-10-2018
Page 2 of 3
B
5
6
5
6
Publicidad
