Hardware Installation - IOGear Share Pro Guía De Configuración Rápide

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Hardware Installation

STEP 1
Turn on both the video source and the display (TV or projector). Make
sure that the input source on your display corresponds to the HDMI
port that the transmitter is connected to.
STEP 2
Insert the transmitter into the USB-C port of your video source device.
Your USB-C port needs to support USB-C Alt mode or USB-C
Connection Standard as this will also carry video signal. If you find that
the transmitter will block any ports on your computer, please use the
USB-C extender (included in this package) to free the adjacent ports.
STEP 3
Both power and wireless LEDs will light up solid and then the wireless
LED will go out and come back on solid.
STEP 4
Insert the receiver into an HDMI input of your display (TV/projector)
making sure the HDMI source input matches the port you plugged the
receiver into.
2
Transmitter
3

Publicidad

Tabla de contenido
loading

Tabla de contenido