Sunex HD SX5205 Manual De Instruccion página 4

EC DECLARATION OF CONFORMITY
We, Sunex International Inc., 315 Hawkins Rd, Travelers Rest, SC
29690, declare under our sole responsibility that the product to
which this declaration relates, is in conformity with the
requirements of the Council Directive of June 1998 on the approxi-
mation of the laws of the Member States relating to machinery.
(EN792, 98/37/EC)
Harmonized Standards Applied: EN 792-6
National Standards Applied: ISO 8662-7, ISO 15744-2002
Machine Name: SX5206 Angle Die Grinder
Serial No.: TS0121701 or higher
Techical Data: 1/4" Collet Std., Air Pressure: 90 psi (6.2 bar)
Noise and Vibration Declaration
Tool produces a noise level (no load) of 86 dBA
sound pressure with 3 dBA uncertainty per
EN ISO15744-2002. Vibration level is <2.5 m/s2
tested per EN 28662-1 & EN28662-7:1997
Warranty Service Centers:
Air & Hydraulic Repair
315 Hawkins Road
Travelers Rest, SC 29690
TEL# 877-786-3939
Power Tool Repair
891 Moe Drive Suite H
Akron, OH 44310
TEL# 330-630-0022
Discount Tool Repair
3433 Losee Road #1
North Las Vegas, NV 89030
TEL# 702-657-6570
Limited 2 Year Warranty:
SUNEX INTERNATIONAL INC. WARRANTS TO ITS CUSTOMERS THAT THE COMPANY'S SUNEX HD
DEFECTS IN WORKMANSHIP AND MATERIALS.
Sunex International Inc. will repair or replace its Sunex HD
workmanship or materials, based upon the terms and conditions of the following described warranty plan. This product carries
a TWO-YEAR warranty. During this warranty period, Sunex Tools
defective in material or workmanship.
Other important warranty information....
This warranty does not cover damage to tools arising from alteration, abuse, misuse, damage and does not cover any repairs or
replacement made by anyone other than an authorized Sunex HD
Sunex International Inc.'s sole liability under this or any implied warranty, and under no circumstances shall we be liable for any
incidental or consequential damages.
Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
Return the tool to your nearest authorized Sunex HD
name, address, and proof of purchase date, along with a description of the suspected defect. If you have any questions about
warranty service, please contact Sunex Tools
gives you specific legal rights and you may also have other rights which vary from state to state.
Shipping Address:
Sunex Tools ® • 315 Hawkins Rd. • Travelers Rest, SC 29690
Mailing Address:
Sunex Tools ® • P.O.Box 1233 • Travelers Rest, SC 29690
SX5205, SX5205L, SX5206: Parts Breakdown & Operating Manual 4
SX5205_5205L_5206_Manual_080712.indd 4
Tri-County Power Tool, Inc.
1300 Brookpark Road
Cleveland, OH 44109
(216) 398-6120
Diversified Power Inc.
90 Buttermill Avenue,
Vaughan, Ontario
L4K 3X7 Canada
TEL# 905-760-9077
TOLL FREE# 800-821-7975
®
air tools which fail to give satisfactory service due to defective
®
will repair or replace at our option any tool which proves to be
® service center from the list above. The foregoing obligation is
® warranty service center, transportation prepaid. Be certain to include your
® at 1-800-833-7869, or on the internet at www.sunextools.com. This warranty
Signature of Issuer:
Name and Position of Issuer: John Stratton, Product Manager
Sunex International Inc. Date of Issue:
Specifications
Collet/Spindle Size ......................................................... 1/4"
Free Speed ........................................................ 18,000 RPM
Motor Size .................................................................. 0.5 HP
Length ................................................................7" (178mm)
Weight ......................................................... 1.5 Lbs. (0.7 kg)
Avg. Air. Cons. ............................................3.1 cfm (88 l/min)
Air Inlet ................................................................... 1/4" NPT
Min. Hose Size ............................................ 3/8" I.D. (10mm)
®
March 9, 2012.
SX5206
AIR TOOLS ARE FREE FROM
Rev. 08/07/12
8/9/12 5:45 PM