English; Montage Instructions Of 1250 External Motor - THERMEx 1240 Instrucciones De Montaje

Decor 810/830 external motor

Montage instructions of 1250 external motor

1. MONTAgE iNSTRUcTiONS OF 1250 EXTERNAl MOTOR
1.1 MONTAgE OF hANgiNg BAR
there are 2 pieces l formed hanging plates for installation of external
motor to appropriate place. these are given with screw set. screw these
plates with M5 x 40 thumbscrews to M5 turnscrews on external motor
cabinet. Photo 1
1.2 DRiViNg WAll PlUgS iN
Drive 8mm holes on the surface that external motor will be hang. nail
Ø10 mm wall plugs to (a,B) holes. Photo 2
1.3 NAiliNg WAll PlUgS
nail hanging screws to 10mm wall plugs with (a,B) 5,5x60 thumb-
screws. there should be 5mm distance between screw head and wall.
Photo 3
1.4 MONTAgE OF Ø 200 MM PlASTic chiMNEY ADAPTOR
Mount Ø 200mm plastic chimney adaptor to air-outlet of external
motor and fix it to the chimney hood with 3,5x9,5 screw. screws are
given with screw set. Photo 4
1.5 hANgiNg EXTERNAl MOTOR
holding external motor on its body, hang it on the wall with (l) plate
that you connected previously through a and B points. Photo 5
16
Decor 810_830 ekstern_24770.indd 16
1
2
3
A B
4
5
B
A
30/06/10 07.58