Before You Begin - U.S.Robotics 7924a Guia De Instalacion

Before You Begin

Note: For more information, you can also refer to the Support section of the U.S. Robotics
Web site at http://www.usr.com/support
Note: Your model number is 7924A. It is important that you have your serial number
written down before you install the 24-Port 10/100 Ethernet Switch. You can find your serial
number on the bottom label of the 24-Port 10/100 Ethernet Switch and on the side of the
package. If you ever need to call our Technical Support department, you will need this number to
receive assistance.
Step 1. Connect the power supply
Step 2. Connect your 24-Port 10/100 Ethernet Switch to your Ethernet-ready
device
24 Port 10/100Mbps Switch
2
100-240VAC
2 4 6 8 10 12 14 16 18 20 22
9 11 13 15 17 19 21
1 3 5 7
ON
OFF
24
U.S. Robotics
24 Port 10/100Mbps Switch
23
Ethernet cable
100-240VAC