System Startup; System Software - bto W940SU1 Manual De Instrucciones

System Startup

1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.
5. Attach the AC/DC adapter to the DC-In jack on the left of the
computer, then plug the AC power cord into an outlet, and
connect the AC power cord to the AC/DC adapter.
6. Use one hand to raise the lid/LCD to a comfortable viewing angle
(do not exceed 130 degrees); use the other hand (as illustrated in
Figure 1) to support the base of the computer (Note: Never lift
the computer by the lid/LCD).
7. Press the power button to turn the computer "on".

System Software

Your computer may already come with system software
pre-installed. Where this is not the case, or where you are re-
configuring your computer for a different system, you will
find this manual refers to Microsoft Windows 8.1.
4
Note that you should al-
ways shut your computer
down by
Shut down command in
Windows
This will help prevent hard
disk or system problems.
Click
Charms Bar (use the Win-
dows Logo Key
key combination to access
the Charms
choose Shut down from
the Power menu.
Or
Choose Shut down or
sign out > Shut down
from the context menu (use
the Windows Logo Key
+ X key combination
to access
menu).
130
ﾟ
Opening the Lid/LCD/
Computer with AC/DC
Adapter Plugged-In

Shut Down
choosing the
(see below).
Settings in the
+ C
Bar) and
the context
Figure 1