iNSTALLATioN
The special decoder presents four holes for wall fastening by means of 6mm diameter bolts (not provided).
The decoder can be wall fitted with the wires either embedded or not.
important: In both cases, the relays will directly control the high voltage loads. The wires connected to the
relays terminal block must pass in separate channel with respect to the rest of the system.
DUCT + WIRES
COVER
FRAME
WALL
COVER
FRAME
DUCT + WIRES
WALL
For the device programming please refer to the IperVoice System manual.
5
DS1039-019A