Product Scheme; Fast Start; How To Use - unotec 20.0149.01.00 Manual De Instrucciones

Product scheme

1. LCD Screen
2. Menu button.
3. Start Button
4. Strap.
5. Strap fastener.

Fast Start

The smartband requires the App to connect to the
smartphone. Before downloading, check if your
device is iOS 7.1 or higher, Android 4.4 or higher
and also supports Bluetooth 4.0.
You can download and install it in two ways:
1. Scanning the QR code and downloading the application.
2. Look for the "VeryFit for heart rate" application in Play store or Apple Store.
Switch on and Charge
The device will automatically turn on unless the battery is low. In this case, please use
the included cable to charge.
Coupling the device
Turn on the Bluetooth in the smartphone and open the installed application that will
search the device so sync with it. Press the button of the smartband to turn the LCD on
and be able to match.
In Android devices, you can select in the app the notifications you want to receive.
In iOS devices, if you want to receive notification alarms in your Smartband, use the app
"VeryFit for heart rate" in your phone. It will be requested a new Blue- tooth link which
you must accept. From that momento on, you can select in the app the notifications you
want to receive.

How to use

To scroll the different modes of the device, press the button (3). In the normal mode, you
will see the following functions:
Time mode
Step mode
Calories mode
Find phone mode (Only if it is activated)
4
english
1
2
Heart beat mode
Distance mode
Alarm mode (Only if it is activated)
5
4
3