Husky WeatherBeater Instrucciones De Cuidado Y Uso página 3

Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front
floor liners are custom molded to fit your Toyota Land Cruiser Prado. The liners are made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your
new floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
well. Use of Armor All
INSTALLATION INSTRUCTIONS FOR YOUR TOYOTA LAND CRUISER
PRADO FRONT WeatherBeater® FLOOR LINERS
LEFT OR DRIVER'S SIDE
TO EASE INSTALLATION OF YOUR LAND CRUISER PRADO FRONT FLOOR LINERS, MOVE THE
FRONT SEATS TO THEIR REAR MOST POSITION. WITH THIS DONE, THE FACTORY CARPET
HOOK(S) LOCATED IN THE CARPET OF THE DRIVER'S SIDE FLOOR CAN BE EASILY REMOVED.
REMOVING THE HOOK(S) WILL ALLOW YOUR LINER TO LAY COMPLETELY FLAT. TO REMOVE
THE HOOK(S), APPLY FIRM AND EVEN PRESSURE WHILE LIFTING THE END OF THE HOOK ARM
STRAIGHT UP. ONCE THE HOOK(S) ARE REMOVED, INSTALL THE LINERS AND REPOSITION
SEATS AS DESIRED.
CARE AND USE INSTRUCTIONS
® ®
, Son-of-a-Gun or similar items is discouraged as these products make the liners slick.
RIGHT OR PASSENGER'S SIDE
9602_Instrucciones de Instalación Frontal_Traseros Prado 04/26/2012
® ®
or Glass Plus work