KitchenAid KSMVSA Manual De Instrucciones página 6

USING THE STAND MIXER ATTACHMENT
USING THE FRESH PREP SLICER/SHREDDER ATTACHMENT
NOTE: For best results, feed only one item at a time into the feed tube (ex. carrot).
Do not feed items into the feed tube by hand; always use the food pushers. If food
remains in the Fresh Prep Slicer/Shredder attachment after running, turn the Stand Mixer
to "0" (Off), remove the remaining items, and place back into the feed tube to shred
or slice again.
Place a large bowl under the Fresh
1
Prep Slicer/Shredder attachment to
catch food as it comes out.
Turn the Stand Mixer to Speed 4,
then use the appropriate food
3
pusher to feed the food item
into the feed tube.
6 | USING THE STAND MIXER ATTACHMENT
Cut food so that it fits within the
2
feed tube.
Push down on the release lever and
4
pull out the blade, in order to change
to a new blade.